Every time we collect a rock sample on Mars, Perseverance performs an hours-long set of carefully choreographed operations with its robotic arm, the coring drill, and the Adaptive Caching Assembly. One of these operations is docking: the process by which the arm aligns itself with the Bit Carousel on the front of the rover, so that the corer can drop off and pick up new drill bits.

Docking happens twice during sample collection. First, the robotic arm docks to drop off the currently-chucked abrading bit and pick up a coring bit with an empty sample tube. Then, after collecting a rock sample, it docks again to drop off the coring bit with a now-filled sample tube, which will be processed, sealed, and stored by the caching assembly.

Docking works by guiding a set of small posts on the end of the robotic arm into a matching set of cones on the dock. Imagine plugging your charger into your phone or computer - even if you don't think about it, you rely a lot on the tactile feedback from your hand and fingertips to feel if you need to slide the plug to the side, to line it up a little better, and to know when it's reached the bottom.

Docking works the same way. A force sensor on the end of the robotic arm tells Perseverance how hard it's pushing and in which directions, and Perseverance uses this data to guide the arm into place and to determine when docking is complete. (The dock also includes microswitches at the bottom of each cone which are pressed when the arm is almost docked, which serve as an extra verification). Once the posts reach the bottom of the cones, the robotic arm pushes harder into the dock with almost 650N (146 lbs) of force to make sure it stays docked during bit exchange.

I've worked on docking for most of my 6-year career at JPL, and my goal has been to make it reliable and easy - just like plugging in your phone. Getting to this point required a lot of design and testing (including docking almost 2000 times in various testbeds here on Earth), and it's been a privilege to see docking happen successfully many times on Mars already. I'll always be a little nervous every time we collect a sample, but my fingers are crossed for many more successful and easy docking attempts.

Related Links
Mars 2020 Perseverance Rover Mission
Mars News and Information at MarsDaily.com
Lunar Dreams and more

Thanks for being here; We need your help. The SpaceDaily news network continues to grow but revenues have never been harder to maintain. With the rise of Ad Blockers, and Facebook - our traditional revenue sources via quality network advertising continues to decline. And unlike so many other news sites, we don't have a paywall - with those annoying usernames and passwords. Our news coverage takes time and effort to publish 365 days a year. If you find our news sites informative and useful then please consider becoming a regular supporter or for now make a one off contribution.
SpaceDaily Contributor $5 Billed Once credit card or paypal		SpaceDaily Monthly Supporter $5 Billed Monthly paypal only

Sols 3287-3288: Assessing a New Potential Drill Target
Pasadena CA (JPL) Nov 08, 2021
After our short bump on Tuesday, Curiosity has reached a new potential drill location. When we first arrived at the clay-sulfate transition, the science team decided on a strategy to drill every ~25 m in elevation gain. This allows us to systematically document any changes in the composition of the terrain while being reasonable with our limited rover resources. The terrain is beginning to steepen as Curiosity gets close to the end of this region, so even though we're only a few drives away from ... read more

Read more from original source...