Write a comment
Engineers at NASA have identified the potential cause of a payload computer problem that has sidelined the Hubble Space Telescope for more than a month.
The agency said Thursday it would start a process to switch to a backup system, and that the telescope could be back to normal operations within a few days.
The payload computer, part of Hubble's Science Instrument Command and Da Engineers at NASA have identified the potential cause of a payload computer problem that has sidelined the Hubble Space Telescope for more than a month.
The agency said Thursday it would start a process to switch to a backup system, and that the telescope could be back to normal operations within a few days.
The payload computer, part of Hubble's Science Instrument Command and Data Handling unit, or SI C&DH unit, controls the telescope's many scientific instruments. When it froze, Hubble's instruments automatically halted operations and went into "safe mode."
After weeks of investigation, engineers at NASA have traced the problem to Hubble's Power Control Unit, or PCU, which is also located in the SI C&DH unit.
The PCU features a power regulator that supplies the payload computer and its memory with a constant supply of power. The five-volt flow of electricity is monitored by a secondary protection circuit. If power supply levels drop, the protection circuit tells the payload computer to halt operations.
NASA engineers suspect the flow of electricity from the PCU has either dropped below acceptable levels or the protection circuit has malfunctioned.
Because ground control signals have failed to reset the PCU, engineers have been given the green light to activate the backup side of the SI C&DH unit, which contains a backup PCU.
"The switch will begin Thursday, July 15, and, if successful, it will take several days to completely return the observatory to normal science operations," according to news release from NASA.
Now over the age of 30, Hubble has experienced dozens of technological hiccups over the years, but time and again, engineers have managed to find a fix.
Engineers performed a similar SI C&DH unit switch after a component failure in 2008. The entire SI C&DH unit was replaced during a servicing mission in 2009, allowing Hubble to resume normal operations.
Related Links
Stellar Chemistry, The Universe And All Within It
|
| Tweet |
| Thanks for being there;
We need your help. The SpaceDaily news network continues to grow but revenues have never been harder to maintain. With the rise of Ad Blockers, and Facebook - our traditional revenue sources via quality network advertising continues to decline. And unlike so many other news sites, we don't have a paywall - with those annoying usernames and passwords. Our news coverage takes time and effort to publish 365 days a year. If you find our news sites informative and useful then please consider becoming a regular supporter or for now make a one off contribution. | ||
| SpaceDaily Monthly Supporter
$5+ Billed Monthly |  | SpaceDaily Contributor
$5 Billed Once credit card or paypal |
Operations underway to restore payload computer on Hubble Space Telescope
Baltimore MD (SPX) Jul 15, 2021
NASA has identified the possible cause of the payload computer problem that suspended Hubble Space Telescope science operations on June 13. The telescope itself and science instruments remain healthy and in a safe configuration. The payload computer resides in the Science Instrument Command and Data Handling (SI C&DH) unit. It controls, coordinates, and monitors Hubble's science instruments. When the payload computer halted, Hubble's science instruments were automatically placed into a safe config ... read more