Like two superheroes finally joining forces, Sandia National Laboratories' Z machine - generator of the world's most powerful electrical pulses - and Lawrence Livermore National Laboratory's National Ignition Facility - the planet's most energetic laser source - in a series of 10 experiments have detailed the responses of gold and platinum at pressures so extreme that their atomic structures momentarily distorted like images in a fun-house mirror.

Similar high-pressure changes induced in other settings have produced oddities like hydrogen appearing as a metallic fluid, helium in the form of rain and sodium a transparent metal. But until now there has been no way to accurately calibrate these pressures and responses, the first step to controlling them.

Said Sandia manager Chris Seagle, an author of a technical paper recently published by the journal Science, "Our experiments are designed to measure these distortions in gold and platinum as a function of time. Compression gives us a measurement of pressure versus density."

Following experiments on the two big machines, researchers developed tables of gold and platinum responses to extreme pressure. "These will provide a standard to help future researchers calibrate the responses of other metals under similar stress," said Jean-Paul Davis, another paper author and Sandia's lead scientist in the effort to reliably categorize extreme data.

Data generated by experiments at these pressures - roughly 1.2 terapascals (a terapascal is 1 trillion pascals), an amount of pressure relevant to nuclear explosions - can aid understanding the composition of exoplanets, the effects and results of planetary impacts, and how the moon formed.

The technical unit called the pascal is so small it is often seen in its multiples of thousands, millions, billions or trillions. It may be easier to visualize the scale of these effects in terms of atmospheric pressure units. The center of the Earth is approximately 3.6 million times the atmospheric pressure at sea level, or 3.6 million atmospheres. Z's data reached 4 million atmospheres, or four million times atmospheric pressure at sea level, while the National Ignition Facility reached 12 million atmospheres.

The force of the diamond anvil
Remarkably, such pressures can be generated in the laboratory by a simple compression device called a diamond anvil.

However, "We have no standards for these extreme pressure ranges," said Davis. "While investigators see interesting events, they are hampered in comparing them with each other because what one researcher presents at 1.1 terapascals is only 0.9 on another researcher's scale."

What's needed is an underlying calibration tool, such as the numerical table these experiments helped to create, he said, so that scientists are talking about results achieved at the same documented amounts of pressure.

"The Z-NIF experiments will provide this," Davis said.

The overall experiments, under the direction of Lawrence Livermore researcher D. E. Fratanduono, relied on Z machine's accuracy as a check on NIF's power.

Z's accuracy, NIF's power
Z's force is created by its powerful shockless magnetic field, generated for hundreds of nanoseconds by its 20 million-ampere pulse. For comparison, a 120-watt bulb uses one ampere.

The accuracy of this method refocused the higher pressures achieved using NIF methods.

NIF's pressures exceeded those at the core of the planet Saturn, which is 850 gigapascals. But its laser-compression experiments sometimes required a small shock at the start of the compression wave, raising the material's temperature, which can distort measurements intended to set a standard.

"The point of shockless compression is to keep the temperature relatively low for the materials being studied," said Seagle. "Basically the material does heat as it compresses, but it should remain relatively cool - hundreds of degrees - even at terapascal pressures. Initial heating is a troublesome start."

Another reason that Z, which contributed half the number of "shots," or firings, and about one-third the data, was considered the standard for results up to 400 gigapascals was because Z's sample size was roughly 10 times as big: 600 to 1,600 microns thick compared with 60 to 90 microns on NIF. A micron is a thousandth of a millimeter.

Larger samples, slower pulses equal easier measurements
"Because they were larger, Z's samples were less sensitive to the microstructure of the material than were NIF's," said Davis. "Larger samples and slower pulses are simply easier to measure to high relative precision. Combining the two facilities really tightly constrained the standards."

Combining Z and NIF data meant that the higher-accuracy, but lower-intensity Z data could be used to pin down the low-to-medium pressure response, and with mathematical adjustments, reduce error on the higher-pressure NIF data.

"The purpose of this study was to produce highly accurate pressure models to approximately one terapascal. We did that, so this combination of facilities has been advantageous," said Seagle.

Related Links
Sandia National Laboratories
Space Technology News - Applications and Research

Thanks for being there; We need your help. The SpaceDaily news network continues to grow but revenues have never been harder to maintain. With the rise of Ad Blockers, and Facebook - our traditional revenue sources via quality network advertising continues to decline. And unlike so many other news sites, we don't have a paywall - with those annoying usernames and passwords. Our news coverage takes time and effort to publish 365 days a year. If you find our news sites informative and useful then please consider becoming a regular supporter or for now make a one off contribution.
SpaceDaily Monthly Supporter $5+ Billed Monthly		SpaceDaily Contributor $5 Billed Once credit card or paypal

Ultralight material withstands supersonic microparticle impacts
Boston MA (SPX) Jun 25, 2021
A new study by engineers at MIT, Caltech, and ETH Zurich shows that "nanoarchitected" materials - materials designed from precisely patterned nanoscale structures - may be a promising route to lightweight armor, protective coatings, blast shields, and other impact-resistant materials. The researchers have fabricated an ultralight material made from nanometer-scale carbon struts that give the material toughness and mechanical robustness. The team tested the material's resilience by shooting it with ... read more

Read more from original source...