This drone hauled a model of the Juventas CubeSat high into the air, as a practical test of the antennas designed to perform the first radar sounding of the interior of an asteroid.
The shoebox-sized Juventas will be transported to the Didymos double-asteroid system by ESA's Hera mission. Once it flies freely in space, Juventas will deploy a cross antenna to perform a low-frequency radar scan up to 100 m deep within the smaller of the two asteroids, Dimorphos. Such low frequencies result in long wavelengths of around 6 m, too long for most indoor measurement facilities.
"To verify the antenna characteristics, we performed this aerial test with the support of the Hexapilots drone company," notes Martin Laabs of the Chair for Radio Frequency and Photonics Engineering of Technical University Dresden in Germany.
"For the most accurate measurements of the antennas' radiation properties, they had to be as far away as possible from other objects, so the Juventas model was hung 10 m down from the drone, which was flown up to 50 m into the sky.
"
The testing allowed them to assess the amount of radiated power of the antennas compared to radio frequency modeling, and also to assess at which altitude interference from ground reflections would cut out.
TU Dresden is working on the antenna placement, amplification and performance simulation for Juventas's radar instrument, while Astronika in Poland is constructing the antennas and EmTroniX in Luxembourg is developing the signal generation system. The overall Juventas mission is being led for ESA by GomSpace.
Juventas's radar instrument, or JURA, is scientifically and technically overseen by Alain Hérique of France's Institut de Planétologie et d'Astrophysique de Grenoble (IPAG) at the Université Grenoble Alpes and Dirk Plettemeier of TU Dresden.
Citation: Video: Drone test of Hera mission's asteroid radar (2021, April 14) retrieved 14 April 2021 from https://phys.org/news/2021-04-video-drone-hera-mission-asteroid.html
This document is subject to copyright. Apart from any fair dealing for the purpose of private study or research, no part may be reproduced without the written permission. The content is provided for information purposes only.