Almost all launch vehicles and large missiles liftoff from the ground in the vertical direction and continue toward some objective. For space launch systems the objective is achieving orbit through the use of ascent trajectories that are usually optimized for weather and mission conditions in order to maximize performance while maintaining conservative safety margins.

The actual shape of a path to orbit is influenced by a number of factors, including winds and the desired payload injection parameters. However, the ideal trajectory profile is usually based on reaching orbital speed, altitude and orientation as the upper stage completes its injection burn.

In most cases, the trajectory is designed to avoid aerodynamic side loads, i.e., the angle of attack is kept as close to zero as possible. Ignoring wind factors, this is achieved through the use of a "gravity" turn or "zero-lift" turn.

This is a trajectory optimization technique that uses the transverse component of gravity (that is perpendicular to the launch vehicle's longitudinal axis) to turn the velocity vector as it ascents toward orbit.

Control is achieved by carefully changing the pitch orientation of the vehicle during its powered ascent. The gravity turn offers the advantage of a natural ascent profile without wasting any of the vehicle's propellant. Furthermore, by keeping the angle of attack near zero, transverse aerodynamic stresses are kept to a minimum, allowing a lighter launch vehicle.

At liftoff, the rocket begins its vertical ascent, gaining both speed and altitude. Initially, gravity acts directly against the thrust of the rocket, limiting its vertical acceleration and acting as "gravity drag."

As soon as the vehicle clears any service towers and performs any required roll maneuvers, a "pitchover maneuver" is executed in order to steer the rocket's longitudinal axis toward the downrange direction and to establish the ultimate orbit plane.

This maneuver is accomplished by gimbaling the rocket engines slightly to direct some of the thrust to one side, creating a net torque on the vehicle. Once this is completed, a small part of the gravitational force is directed perpendicular to the longitudinal axis.

This is the beginning of the gravity turn. From this point until orbit injection, the transverse gravity component continues to grow and causes the vehicle's velocity vector to rotate toward the horizon as it ascends.

The exact initial pitchover angle depends on the specific launch vehicle and is orbital destination. As soon as the pitchover maneuver is completed, the rocket engines are returned to their non-gimbaled orientation.

Note that this small steering maneuver is the only one needed during an ideal ascent in which thrust must be used for the purpose of steering. In reality, wind forces do cause minor gimbal-induced corrections during ascent.

Since all space launch vehicles consist of at least two stages, each stage is fired sequentially, resulting in slight discontinuities in thrust. Therefore, ascent sequences are designed to deal with lower-stage shutdown, separation and upper-stage startup. An actual ascent sequence involves many events and steps.

Related Links
Launchspace
Rocket Science News at Space-Travel.Com

Thanks for being there; We need your help. The SpaceDaily news network continues to grow but revenues have never been harder to maintain. With the rise of Ad Blockers, and Facebook - our traditional revenue sources via quality network advertising continues to decline. And unlike so many other news sites, we don't have a paywall - with those annoying usernames and passwords. Our news coverage takes time and effort to publish 365 days a year. If you find our news sites informative and useful then please consider becoming a regular supporter or for now make a one off contribution.
SpaceDaily Monthly Supporter $5+ Billed Monthly		SpaceDaily Contributor $5 Billed Once credit card or paypal

Stacking complete for twin Space Launch System rocket boosters
Kennedy Space Center FL (SPX) Mar 10, 2021
Stacking is complete for the twin Space Launch System (SLS) solid rocket boosters for NASA's Artemis I mission. Over several weeks, workers used one of five massive cranes to place 10 booster segments and nose assemblies on the mobile launcher inside the Vehicle Assembly Building (VAB) at NASA's Kennedy Space Center in Florida. Engineers with Exploration Ground Systems placed the first segment on Nov. 21, 2020, and continued the process until the final nose assembly was placed on March 2. Pr ... read more

Read more from original source...