Print this page

NASA's Europa Clipper gets its wheels for traveling in deep space

Written by  Wednesday, 23 November 2022 19:19
Write a comment
NASA’s Europa Clipper Gets Its Wheels for Traveling in Deep Space
Engineers install 2-foot-wide reaction wheels onto the main body of NASA's Europa Clipper spacecraft. The orbiter is in its assembly, test, and launch operations phase in preparation for a 2024 launch. Credit: NASA/JPL-Caltech

The enormous spacecraft that will head to Jupiter's moon Europa uses four large reaction wheels to help keep it oriented.

Just as NASA's Mars rovers rely on robust to roam the Red Planet and conduct science, some orbiters rely on wheels, too—in this case, —to stay pointed in the right direction. Engineers and technicians at NASA's Jet Propulsion Laboratory in Southern California recently installed four reaction wheels on Europa Clipper, which will rely on them during its journey at Jupiter's icy moon Europa.

When NASA's spacecraft heads through deep space, slips into orbit around Jupiter, and collects science observations while flying dozens of times by Europa, the wheels rotate the orbiter so that its antennas can communicate with Earth and its science instruments, including cameras, can stay oriented.

Two feet wide and made of steel, aluminum, and titanium, the wheels spin rapidly to create torque that causes the orbiter to rotate in the opposite direction. Isaac Newton's third law of motion also applies in deep space and explains the underlying phenomenon: For every action, there is an equal and opposite reaction. The reaction wheels cause the spacecraft to react to the spinning action of the wheels.

NASA’s Europa Clipper Gets Its Wheels for Traveling in Deep Space
All four of the reaction wheels installed onto NASA's Europa Clipper are visible in this photo, which was shot from underneath the main body of the spacecraft while it is being assembled. Credit: NASA/JPL-Caltech

Here's one way to visualize how reaction wheels work: Imagine you are sitting in a swivel chair and lift your feet off the floor so that you are free to rotate. If you jerk your torso one direction, the chair and your legs will rotate the opposite direction. The reaction wheels work the same way: As the reaction wheel's motor accelerates the metal wheel in one direction, the spacecraft experiences an acceleration in the opposite direction.

Without those reaction wheels, Europa Clipper wouldn't be able to do its science investigations when it arrives at the Jupiter system in 2030 after its 2024 launch. Scientists believe Europa harbors a vast internal ocean that may have conditions suitable for supporting life. The spacecraft will gather data on the moon's atmosphere, surface, and interior—information that will help scientists learn more about the ocean, the ice crust, and potential plumes that may be venting subsurface water into space.

NASA’s Europa Clipper Gets Its Wheels for Traveling in Deep Space
Engineers and technicians work together to install reaction wheels on the underside of the main body of NASA's Europa Clipper spacecraft, which is in its assembly, test, and launch operations phase. Credit: NASA/JPL-Caltech

During its orbits around Jupiter, Europa Clipper will rely on reaction wheels to help it perform thousands of turns, or "slews." Although the spacecraft could perform some of those maneuvers with thrusters, its thrusters need fuel—a finite resource aboard the orbiter. The reaction wheels will run on electricity provided by the spacecraft's vast solar arrays.

The trade-off is that the reaction wheels work slowly. Europa Clipper's reaction wheels will take about 90 minutes to rotate the craft 180 degrees—a movement so gradual that from a distance, it would be imperceptible to the human eye. The of the spacecraft will be three times slower than the minute hand on a clock.

Also, they can wear out over time. It happened on NASA's Dawn spacecraft, requiring engineers to figure out how to rotate using thrusters with the available fuel. To address this, engineers have installed four wheels on Europa Clipper even though only three are needed to maneuver. They alternate which three wheels are in operation to even the wear. That leaves them with a "spare" wheel if one of the others fails.

Installing the wheels was one of the most recent steps of the phase known as assembly, test, and launch operations. Science instruments continue to arrive at JPL to be added to the spacecraft. Next, a variety of tests will be conducted, as the moves toward its October 2024 launch period. After traveling over 1.8 billion miles (2.9 billion kilometers), Europa Clipper will be set to begin unlocking the secrets of this icy world.

Provided by NASA

Citation: NASA's Europa Clipper gets its wheels for traveling in deep space (2022, November 23) retrieved 23 November 2022 from https://phys.org/news/2022-11-nasa-europa-clipper-wheels-deep.html
This document is subject to copyright. Apart from any fair dealing for the purpose of private study or research, no part may be reproduced without the written permission. The content is provided for information purposes only.

Read more from original source...

You must login to post a comment.
Loading comment... The comment will be refreshed after 00:00.

Be the first to comment.